Skip to content

~ THE POOL BUTLER BLOG DETAILS ~

Home / Blog / Where Should You Install a Pool Check Valve?
install a pool check valve

Where Should You Install a Pool Check Valve?

If you’re like most pool owners, you want to do everything possible to keep your swimming oasis in top condition. One way to help protect your pool is by installing a check valve. But where should you put it?

In this blog post, we will answer all of your questions about pool check valves and provide tips on how and where to install them for optimal protection!

What is a Pool Check Valve?

A pool check valve is a backflow prevention device that is installed in the plumbing lines of your pool. Its main purpose is to keep water from flowing back into your pool system, which could contaminate the water and cause damage to the pump and other equipment.

Why Do I need a Pool Check Valve?

There are several reasons why you might need a pool check valve. First, if your pool is connected to a city water supply, it is required by law in some states. Second, even if you have a private well, installing a check valve is a good idea to prevent contamination of your pool water.

What Happens If My Pool Check Valve is Damaged?

If your pool check valve is damaged, water can flow back into your pool, contaminating the water and causing damage to the pump and other equipment. You will know that your pool valve check is damaged if you see water leaking from it or if the valve is stuck in the open position. If this happens, you should replace the valve as soon as possible.

How and Where Should You Install a Pool Check Valve?

Now that we know what a pool check valve is and why you need one, let’s talk about how to install it. The best place to install a check valve is as close to the pump as possible. This will ensure that water can only flow in one direction – from the pool to the pump – and not back into the pool.

There are two types of check valves – swing and inline. Swing check valves have a flap inside that opens when water flows in the correct direction and closes when water tries to flow back. Inline check valves have a ball or disc inside that blocks the reverse flow of water.

Step-By-Step Instructions to Install a Pool Check Valve

Installing a pool check valve is a relatively easy task that most pool owners can do themselves. Just follow these simple steps:

-Turn off the power to your pool pump.

-Drain the water from your pool plumbing lines.

-Remove the old check valve (if you have one) by unscrewing it from the fittings.

-Install the new check valve in the same position as the old one.

-Tighten all of the fittings and turn on the power to your pool pump.

-Fill the pool plumbing lines with water and check for leaks.

Takeaways on Installing a Pool Check Valve

Installing a pool check valve is a great way to protect your pool and keep the water clean. Be sure to install it as close to the pump as possible and follow the manufacturer’s instructions for the best results.

If you have any questions about installing a check valve or other pool maintenance tasks, be sure to contact local pool professionals like the pros at The Pool Butler for assistance. We will be happy to help you keep your pool in top condition all season long! Happy swimming!

The Pool Butler

Contact Info

PHONE:

770-439-2644

EMAIL:

service@thepoolbutler.net

HIRAM OFFICE:

3900 Macland Road

Hiram, GA 30141

NORCROSS OFFICE:

6410 Atlantic BLVD

Suite 300

Peachtree Corners, GA 30071