Skip to content

~ THE POOL BUTLER BLOG DETAILS ~

Home / Blog / How to Install a Pool Pump
How to Install a Pool Pump

How to Install a Pool Pump

Installing a pool pump can be a daunting task, but it’s not as hard as you might think! In this blog post, we’ll take you through the process step-by-step. We’ll even discuss what supplies and tools you will need to install a pool pump. So if you have been thinking about installing a pool pump on your own, this post is for you!

What is a Pool Pump?

A pool pump is a mechanical device that is used to circulate water in a swimming pool. The pool pump is responsible for pulling water from the pool and pushing it back into the circulation system. The pump is connected to the pool through a series of pipes.

Why Do I Need a Pool Pump?

There are several reasons why you might need a pool pump. The most common reason is to circulate the water in the pool. This helps to keep the water clean and clear, and it also prevents stagnation. Additionally, circulating the water can help to evenly distribute chemicals throughout the pool, which will keep your swimming area safe and enjoyable.

However, another reason why you might need a pool pump is to operate a pool heater. Pool heaters require a lot of water to function properly, and the pump moves that water through the system.

Finally, some pool pumps are equipped with a timer, which can be used to automatically turn the pump on and off. This can be helpful if you want to make sure that the pool is circulating while you are away from home. It also helps if you want to save money on your energy bill.

Selecting the Right Pool Pump

Now that you know why you might need a pool pump, it’s time to select the right one for your pool. There are a few things that you will need to consider, such as the size of your pool, the type of pool pump, and the features that you want.

The first thing that you will need to do is measure the size of your pool. This will help you determine the flow rate that you need. The flow rate is measured in gallons per minute (GPM), and it indicates how much water the pump can move in a minute. Thus, a good rule of thumb is to choose a pump with a flow rate that is double the size of your pool.

For example, if your pool is 20 feet long and 40 feet wide, then you will need a pump with a flow rate of 160 GPM.

The next thing that you need to consider is the type of pool pump. There are two types of pool pumps: submersible and above-ground. Submersible pumps are designed to be placed underwater, while above-ground pumps are designed to sit outside of the pool. Above-ground pumps are typically less expensive, but they can be louder and more difficult to install.

The final thing that you need to consider is the features that you want in your pool pump. Some pumps come with timers, while others have built-in filters. Some models come with both features. Therefore, you should take some time to think about which features would be most beneficial for you. Then you can choose a pump that has those features.

Installing Your Pool Pump

Now that you know what a pool pump is, why you need one, and you have selected the right pool pump for your pool, it’s time to install it.

Tools to Install a Pool Pump

The first thing that you need to do is gather all of the supplies and tools that you will need. This includes:

– A drill

– A screwdriver

– Pliers

– A level

– PVC glue

– Teflon tape

Hose clamps

Prepare the Area

Once you have all of your supplies, you will need to find a suitable location for the pump. This should be a dry, level spot that is close to an electrical outlet. Once you have found a location, you can begin attaching the pipes to the pump. The process will vary depending on the type of pump that you have. Thus, be sure to consult your owner’s manual for specific instructions.

The next thing that you need to do is prepare the area where the pump will be installed. If you are installing an above-ground pump, then you will need to level the ground and clear away any debris. If you are installing a submersible pump, then you will need to clear away any debris from the bottom of the pool.

Connect the Pump to the Pool

Once the area is prepared, it’s time to connect the pump to the pool. If you are installing an above-ground pump, then you will need to connect it to a skimmer. To do this, you will need to use PVC pipes and fittings. First, measure the distance between the skimmer and the pump. Then, cut two pieces of PVC pipe that are that length. Next, glue one end of each piece of pipe to a fitting that is attached to the skimmer and the pump. Finally, attach hose clamps around each fitting to secure the pipes in place.

If you are installing a submersible pump, then you will need to connect it to the return line. The process is fairly similar. To do this, you will need to use PVC pipes and fittings. First, measure the distance between the return line and the pump. Then, cut two pieces of PVC pipe that are that length. Next, glue one end of each piece of pipe to a fitting that is attached to the return line and the pump. Finally, attach hose clamps around each fitting to secure the pipes in place.

Turn on the Pump

Once all of the connections have been made, you can now turn on the pump. Be sure to consult your owner’s manual for specific instructions on how to do this. Once the pump is turned on, it will begin circulating the water in your pool. You may need to adjust the settings on the pump to get the desired flow rate.

You have now successfully installed a pool pump!

Takeaways on How to Install a Pool Pump

Installing a pool pump can seem daunting, but with this guide, it can be a breeze. From selecting the right pump to making sure it is properly installed, you can tackle this project on your own. So whether you are a first-time pool owner or just looking to replace an old pump, keep this blog handy!However, if you’ve just read through these steps and are feeling overwhelmed, don’t stress! Hiring a professional pool company in Atlanta, Georgia to install a pool pump for you guarantees the job will be done quickly and correctly. Your swimming pool will be clean and safe, and you can save money on your energy bill by using a timer to automatically turn the pump on and off. So what are you waiting for? Get out there and install your pool pump -or hire a pro- today!

The Pool Butler

Contact Info

PHONE:

770-439-2644

EMAIL:

service@thepoolbutler.net

HIRAM OFFICE:

3900 Macland Road

Hiram, GA 30141

NORCROSS OFFICE:

6410 Atlantic BLVD

Suite 300

Peachtree Corners, GA 30071